Witness and monitor contractors welding activities, inspection and test in accordance with the approved Quality Plan, ITP, Quality precudures and etc. • Maintains pipe stencil information, including wall thickness, grade and heat numbers and ensures that such information is recorded for any pipe joint that is cut. • Monitor the weld preparation, welding process and NDT as per ITP. • Control storage and certificates of consumables. • Witnessing of welder qualification tests and procedures qualification testing. • Monitor Pre-heat and PWHT. • Checking heat-input. • Verify that all surfaces are in suitable condition for coating activities. • Perform adhesion testing, salt test, dust test, DFT, profile of blasted surface as per ITP. • Coordinate the issue of non-conformance reports through the site QC manager.

- Prior to start of painting and insulation activities ensure that all procedures and material data sheets for compliance with project specifications and practical site operational requirements are reviewed - Ensure all quality control checks and tests are instigated, with records maintained and available as required for surface preparation, dry film thickness checks, adhesion test, temperature and humidity levels etc., all in accordance with contractors’ agreed ITP, method statements and project specifications. Where applicable supervise paint shop activities - Ensure all approved modifications and corrections to the Piping Line List paint and insulation codes are recorded on red-lined ‘as-built’ Line Lists verified as correct by field personnel - Coordination of work front between other departments as per project control requirement. - Weekly and monthly reporting to direct line manager the reason of any delay. - Examine and inspect work progress, equipment to verify safety and ensure that specifications were met. - Supervise of all contractor’s coating construction progress.

• Monitor surface temperature before application of the FBE. • Performs visual checks after blasting, check surface profile, perform dust test. • Visual check the coating surface from any mechanical damage or no wrinkling. • Checking the cutback length appropriate to ITP. No disbondment and no mixing between FBE and adhesive layers during gel time • Performing adhesion testing (peel test). • Performing impact test.

• Monitor Contractor's activities during Procedure Qualification Trials (PQT) all phases of pipe coating production, testing, pipe handling and storage operations. • Checking all certificates of the coating and concrete materials. And all calibration certificates of the inspection and laboratory equipment. • Coordinate and monitor quality control checks of all pipe, pipe coating acceptance activities. This will include corrosion and weight coating, cleanliness end preparations and dimensional control. • Monitor and review all pipe tally and load in/out activities ensuring full traceability. • Coordinate and monitor handling, storage, coating repairs activities and pipe returns. • Participate in all lab tests as per ITP requirement. These include melt flow index of the Adhesive and PP materials. Checking of glass transition and inflection of FBE by Differential scanning calorimeter, Gel time and moisture content of the FBE powder. Cathodic disbondment of FBE, Bent test of the fully applied 3LPP coating. Conductivity of abrasive and Chromate solution. • Checking cleanness of incoming pipes surface, perform salt test. Pre heat before blasting. • Checking surface profile, cleanness and dust level of blasting surface. Perform chromate surface treatment. Checking pipe temperature after induction heating before FBE booth. • Checking full system thickness (of course before on a sample pipe coated with FBE and FBE+Adhesive). Holiday detection of coating. Cutbacks length as per ITP. Visual inspection of surface, Free from any bubbles, any disbondment and no mechanical damage. • Perform Peel test for 3LPP. • Checking of materials certifications of the wire mesh, iron ore, and Portland cement which supplied from manufacture, and laboratory test of the tap water which will be used for concrete. • Aggregate: mix moisture content and cement content checked as per ITP. • Plant calibration of the concrete mix design need to follow up material requirement of the iron ore. • Checking cut back configuration and wire placement inside the CWC. • Compression test of the concrete mix cubes and core after 7 and 28 days from application.

• Executes the specific inspections on materials, equipment and construction/installation activities on site. • Issues the relevant Quality Records and, when necessary, write and send to Quality Control Supervisor non-conformances reports. • Control of storage and certification of consumables. • Performs qualifications of coating processes. • Verification of Batch Certificates of Abrasives & Paints, Calibration certificates of all Instruments / EquipmentsChecks surface preparation. • Calibrating Instruments and maintain Calibration status. • Checks and records atmospheric conditions prior to starting of coating (DUAL FBE) operations. • Carries out wet and dry film thickness checks. • Monitors observations of the correct coding cycles. • Verification the correct cleaning of the joint overlaps after welding burns • Performs visuals inspections. • Perform all necessary inspection activities as per specification • Performs X-cut tests • Evaluates impact testing. • Verify Soluble Salt Contamination on Blasted surface • Verify the qualification of Blaster/Painters. • Anchor Pattern/Profile check of the blasted surface and ensure profile is As per project specification. • Performs visual checks after blasting. • Perform hi voltage holiday tests before lowering ( also internal inspections) • Maintain records of all work done. Including Painting Reports, RFI's. • Coordinating with the Clients for final inspection and obtaining the reports getting signed by the clients when ever required

• Thorough understanding of work scope, work load and project specification related to Painting work. • Allocate work and specify responsibilities for accountability of assigned task and evaluation of performance. • Follows plans and strategies for work plan for the Painting discipline based on the overall project execution plan and strategy. • Monitor overall work schedule and resource mobilization plan for Painting work based on work front (drawing and material release) plan in association with project control. • Implement three week look ahead schedule with inputs from Project Control Department and draw up final weekly execution plan for Painting work. • Review work front, progress and resource deployment against plan on weekly basis with Subcontractors for timely completion of work against schedule. Identify potential threats to safety, quality and progress of work; recommend mitigating measures to site management and follow up for action. • Monitors progress of prefabrication and erection works and reports to Lead Supervisor on a daily basis. • Coordinate with Supervisor of other disciplines at the project site and Lead Supervisor to review work interfaces at field to minimize hold on work. • Preparation/implementation of Method Statement, Job hazard analysis, risk assessment and mitigation plan in consultation with HSSE team for key Painting activities. • Frequently assess Subcontractors' work performance and quality standards to meet the project specification and arrange technical workshop for supervisors and Tool-Box talk for workmen for competency development. • Supervise and guide Subcontractor's Painting Supervisors for timely and accurate work • Execution. Ensure that all the work activities are completed as per the quality norms and as per project specifications. • Supervise preparation and painting of erected works on site. • Checks conformity with Painting Specification. Checks conformity of Painting supports with typical drawings. • Daily coordinates with QC Painting Inspectors. • Ensures that Painting materials are stored and maintained in adequate conditions. Monitors the management of Painting materials and spare parts. • Ensures routine good housekeeping is performed on site by Contractor. • Responsible for establishing, promoting and maintaining a safe and hazard free working environment. • Carry out any other duties as and when required by the supervisor.

• Review and recommend immediate/temporary/permanent repairs for identified anomalies or deficiencies (including upgrade/replacement or corrosion mitigation requirements). • Assist with identification and need for inspection and monitoring requirements of field systems and equipment (including complete systems review for damage mechanism identification). • Assist in Risk Based Inspection (RBI) analysis and revalidation. • Review Material compatibility and coatings requirement for facilities and general construction activities. • Perform failure analysis on corroded and failed components. • Review and recommend engineering solutions for failures and Root Cause Failure Analysis (RCFA) • Monitor and follow up on corrosion monitoring data. • Provide innovative support with respect to the development and implementation of new technology where this can contribute to increasing efficiencies and/or more reliable Integrity related information. • Checking thickness of metals of the structural and pipe-lines with OLYMPUS 37DL PLUS Ut gauge. • Preparing daily and monthly reports . And put all to Excell sheet archive.

• Submitting the RFI (Request for Inspection) to the client inspector. • Review the RFI of Request for Inspection and also the attach document paper. And base into the ITP or QCTP for Quality Control Test Plan requirements. • Raise RFI for final inspection/acceptance form client representative. • Review, monitor and closeout all Contractors Coatings NCRs/quality observations. • Issue NCR for violations and submit it to the QA/QC Department. • Check all inspection equipment, abrasive blasting equipment are all properly tagged prior to commencement of the paints/ coating activities. • Monitoring and verifying blasting and painting quality issues i.e. measuring weather conditions. surface profile, paint thickness, holiday detection test to ensure compliance with relevant project specification • Checking of dew Point, RH% and substrate temperature for suitable of blasting and Coating. • Surveillance inspection of surface preparation, paint mixing, WFT, DFT, adhesion and curing of paint. • Inspection of surface preparation like Replica tape test, Salt contamination test (SCM 400). • Inspect coating for any paint defects for touch up repair. • Adhesion (MEK rub Test, X cut, Cross cut method & Dolly pull off gauge). • Review the P&ID Drawing Piping for Temperature in Insulation of the thermal Hot and Cold Insulation. • Checking the material for Insulation and the Equipment using to the thermal Hot and Cold insulation. • Surveillance the Alignment of Insulation/Cladding Weather Jacketing. • Witness of Surface Preparation and installing of Wire Mesh, Studs bolts and Mineral Wool. • Hot & Cold insulation, Acoustic insulation inspection and reviewing the method statements and ITP for the insulation. • Fire water and drinking water systems. • Review the P&ID drawing piping for temperature in insulation of thermal insulation. • Checking Mainline tapes of U/G pipes for Drainage & Sewer lines. • Inspect of surface preparation, application, repairs and handling for external corrosion protection tape coating and wrapping. Visual inspection of coating, looking for wrinkles, areas not with proper overlap, pockets, etc. Holiday test - with high voltage holiday detector. • Perform high voltage holiday testing of underground piping to ensure that all coating defects are repaired prior to backfilling

• Application of project specifications and all documentation associated with coatings ITPs, procedures, method statements • Periodic Inspection of coating equipment and plant to be used for surface preparation, mixing and the coating application including safety hazards and operating conditions • Routine inspection of all material (including its certification) to be used for the work • Routine inspection of all preparation works, ambient conditions, coating application and testing • Preparation of coating inspection reports • Participate in any training programmes if required. • Daily inspections of PFP , Insulation , TSA • Check ratio of the mixing A and B components of Intumescent coating before application.

Chemical/Prosecc Engineering, Destructive processing technology of oil

National Association Corrosion Engineers, Coatings Inspection

National Association Corrosion Engineers, Coatings Inspection